Stimulation Chemicals
For oil and gas wells needing enhanced performance, our stimulation chemicals provide the solution. These specially formulated chemicals are used to improve production from reservoirs by making it easier for the oil or gas to flow into the wellbore.
Menu
Acid Corrosion Inhibitors
Surfactants
Non-Emulsifiers
Gelling Agents
Viscoelastic Surfactant
Defoamers
Mutual Solvents
Acid Diverters
Corrosion Inhibitors
Asphaltene Dispersants/Inhibitors
Emulsion Breakers for Downhole
Anti Sludge
Friction Reducers
Hydrogen Sulfide Scavengers
Iron Control Agents
Acid Foamers
Acid Emulsifiers
Fluid Loss Additives
Scale Inhibitors
Paraffin (Wax) Dispersants/Inhibitors
Menu
Acid Corrosion Inhibitors
It is an excellent oil soluble brine dispersible corrosion inhibitor. It provides corrosion protection that reduces the effects of hydrogen sulphide in problematic corrosion cracking processes.
Surfactants
Provides excellent water wetting characteristics and designed to use as foaming agent.
It is used in down hole in oil and gas wells for clean-up earlier to the start of production.
Non-Emulsifiers
Mixture of anionic surfactants and works at the interfaces to lower surface tension, so that water forced into the formation permeability under high treatment pressures will again flow out by lower formation gas pressure.
Gelling Agents
Gelling Agent additives are water-soluble, high-molecular-weight additives used in medium- to low-density slurries with predictable performance.
Viscoelastic Surfactant
Viscoelastic Surfactant used to generate viscosity when exposed to saline environments in addition to their rheopectic properties along with temperature induced viscoelasticity make these surfactants highly advantageous for a variety of oilfield applications when compared with standard polymer type viscosifiers.
Defoamers
Defoamers antifoam emulsion which is excellent for controlling foam in cementing applications.
Mutual Solvents
Mutual Solvents used for all light to medium hole cleaning applications, the surfactant blend making it effective filter cake cleaner, as well as removing solids from casing.
Acid Diverters
Used in oil and gas wells to increase stimulation of lower permeable zones within a formation by using a diversion stimulation technique.
Corrosion Inhibitors
Provide corrosion protection in all HCL and HCL-HF blends. By adding this product to the acid mixture, corrosive action of acid on steel at high bottom-hole temperatures can be greatly reduced at temperatures up to 350°F.
Asphaltene Dispersants/Inhibitors
Provides better pumpability and reduced flow resistance in production and pipeline operations. Used to in the treatment of heavy oil residues and to improve the mixing speed and final viscosity.
Emulsion Breakers for Downhole
Emulsion breaker is a mixture of non-ionic surfactants that provides excellent surface tension reduction and assist treatment of flow back, even in hard water conditions. Effective in fracturing and acidizing treatments to assist in fluid clean -up.
Anti Sludge
Anti-sludge agent is added to acids to help prevent the formation of sludge and emulsions during acidizing treatments.
Friction Reducers
It is synthetic polymer gelling agent, provides an efficient way to help control fluid loss and direct the acid stimulation treatment across the fracture face.
Hydrogen Sulfide Scavengers
H2S scavengers are considered as the primary additives in wells with potential production of H2S. Hydrogen sulphide scavengers are appropriate for use at the low H2S concentrations where conventional chemical absorption and physical solvents are not always economical.
Iron Control Agents
Iron Control agents reduces ferric iron to the preferable ferrous iron, which has a greater stability and solubility at a wider range of pH levels and in a wide variety of fluids. It is recommended for use in monovalent and divalent brines.
Acid Foamers
Acid foamers is a special blend of surfactants in water and is very effective in fresh, brackish and in presence of hydrocarbon & maintains performance at down – hole temperatures.
Acid Emulsifiers
Emulsified acids give reduced or retarded acid reaction rates because of the oil-external outer phase. Used to increase production rates of oil and gas in carbonate-containing reservoirs through acid fracturing and matrix acidizing operations.
Fluid Loss Additives
Provides effective fluid loss control in invert mud systems, particularly where harsh environments are encountered & it gives low solids interaction at high mud weights and provides good rheological control.
Scale Inhibitors
This product is phosphonate-type scale inhibitor that prevents scale formation through crystal distortion and chelation process. It is used to prevent scales formation due to calcium carbonate and calcium sulphate and controls barium and strontium sulphate deposition.
Paraffin (Wax) Dispersants/Inhibitors
Improves the flow characteristics and pump ability of crude/fuel oil at low temperatures.